|
CMH
Manufacturing Introduces a New RT Machine
 CMH
Manufacturing Co. introduced a new twist on the reverse tilt process
at the CastExpo. Our static cylinder head machine inspired the
development of the HALL RT2H. The machine has twin opposing rams and a
lower cylinder that can be programmed as a pull or an ejector. The ram
cylinders each have 15” stroke and the distance between the platens
when both rams are open is 42” and with both rams closed the distance
is 12”. The maximum clamping force is 29,000 pounds. The stroke on the
pull/eject is 4” with pulling force of 16,200 pounds and pushing force
of 18,500 pounds. It is available with standard or proportional tilt.
|
