RT2
Reverse Tilting Permanent Mold Casting
Machine
Features
- Low
maintenance due to few moving parts,
heavy duty, rugged, and dependable.
- Unique
design allows the mold to be poured
while the parting line is
perpendicular to the floor. The
Machine tilts the mold so that the
parting line is parallel to the floor
for solidification and ejection.
- Cushioned
tilt cylinder provides a smooth
tilting motion from start to stop.
- Twin ram
cylinders provide a safety factor, as
well as extra holding pressure and
better clamping balance.
- Integral
lower eject is included.
Specifications
| Clamping
pressure |
47,130
lbs. |
(27,378
kg.) |
| Max.
mold size |
21
x 20 in. |
(53.4
x 51 cm) |
| Max.
mold weight |
900
lbs |
(409
kg.) |
| Ram
stroke |
28
in. |
(71.1cm) |
| Daylight
opening |
17.50
in |
(44.5
cm) |
| Pressure
height center |
4.25
in. |
(10.8
cm) |
| Machine
weight |
4,500
lbs |
(2,041
kg.) |
| Tilt
speed |
7
sec. |
|
 Click
to enlarge
The
drawing (above) requires Adobe Acrobat
Reader to view.
|
Ejection Position
Pouring
Position
|
