 Leader
Pins
Stahl
precision ground and hardened alloy steel
leader pins are specifically designed for
use in permanent molds to provide accurate
alignment between the mold halves. With
the use of a retaining bolt and specially
designed shoulder you are no longer faced
with the problems associated with a press
fit type of leader pin.
With
diameters from .500" to 1.000"
these pins are designed to be used in the
construction of both small and large
permanent molds.
Please
refer to the Typical Permanent Mold
Assembly sheet and individual catalogue
sheets and individual catalogue sheets for
all your mold component
requirements.
Part
Number |
Dia |
A |
B |
C |
D |
E |
F |
| 96856 |
1" |
1.120 |
.999 |
1.31 |
.75 |
3.50 |
1/2
- 13 x .75 |
| 96855 |
3/4" |
.870 |
.749 |
1.19 |
.63 |
2.88 |
3/8
- 16 x .62 |
| 96854 |
1/2" |
.620 |
.499 |
1.00 |
.38 |
2.19 |
1/4
- 20 x .50 |
|
Part
Number |
Dia |
| 94844 |
1" |
| 94842 |
3/4" |
| 94840 |
1/2" |
|
|
