CMH Manufacturing - Small Ejector Pins

Casero

Deutsch

English

中文

Casero --> Índice del producto --> Foundry Accessoriesón --> Mold Supplies --> Small Ejector Pins

Small Ejector Pins

Stahl centerless ground ejector pins are made from high carbon steel from durability in operation.

Two semi-finished hex nuts and two semi-finished hex jam nuts are furnished with each pin.

For applications that require longer lengths or where rigidity is considered important we suggest the use of Stahl standard stock extensions for ejector pins.

Please refer to the Typical Permanent Mold Assembly sheet and individual catalogue sheets for all your permanent mold component requirements.

Part Number	A	B	C
88893	4 1/2	6 - 32 x 1	0.1285 (No. 30)
98978	4	10 - 32 x 2 1/2	0.191 (No. 11)
98980	5	10 - 32 x 2 1/2	0.191 (No. 11)
98982	6	10 - 32 x 2	0.191 (No. 11)
98988	4	1/4 - 28 x 2 1/2	0.250 (E)
98989	5	1/4 - 28 x 2 1/2	0.250 (E)
98990	6	1/4 - 28 x 3	0.250 (E)
98992	7	1/4 - 28 x 3	0.250 (E)
98994	8	1/4 - 28 x 3	0.250 (E)
91205	9	1/4 - 28 x 3	0.250 (E)
99017	10	1/4 - 28 x 3	0.250 (E)
98998	4	5/16 - 24 x 2 1/2	0.316 (O)
98999	5	5/16 - 24 x 2 1/2	0.316 (O)
99001	6	5/16 - 24 x 3	0.316 (O)
99003	7	5/16 - 24 x 3	0.316 (O)
99005	8	5/16 - 24 x 3	0.316 (O)
99007	9	5/16 - 24 x 3	0.316 (O)
99009	10	5/16 - 24 x 3	0.316 (O)
99010	11	5/16 - 24 x 3	0.316 (O)
99011	12	5/16 - 24 x 3	0.316 (O)
99012	13	5/16 - 24 x 3	0.316 (O)
99013	14	5/16 - 24 x 3	0.316 (O)
99050	4	3/8 - 24 x 2 1/2	0.377 (V)
99051	5	3/8 - 24 x 2 1/2	0.377 (V)
99052	6	3/8 - 24 x 3	0.377 (V)
99053	7	3/8 - 24 x 3	0.377 (V)
99055	8	3/8 - 24 x 3	0.377 (V)
99016	9	3/8 - 24 x 3	0.377 (V)
99058	10	3/8 - 24 x 3	0.377 (V)
99020	12	3/8 - 24 x 3	0.377 (V)

(806)-744-8003 (Texas)