Mounting Rails - CMH Manufacturing

Do you have existing molds that run on an Autocast mount rail machine? CMH can adapt our time proven #6H to run these molds with more stroke and ejection clearance than the original Autocast machines. See #6H, traditional tilting machines, for machine specifications.

Replacement mount rails and spacers

* Mold mount rails and keys are designed for mounting permanent molds in
- 30 x 30in (762 x 762mm)
- 36 x 36in (914.5 x 914.5mm)
- 42 x 42in (1066.8 x 1066.8mm)
- 48 x 60in (1219.2 x 1524mm)
tiltpour casting machines.

Specifications

Key Mount Rail

Product Number	A	B	Unit Weight
KEY-30	29 7/8in (75.88cm)	3/8in (0.95cm)	1.3lbs (0.58kg)
KEY-40	39 7/8in (101.28cm)	3/8in (0.95cm)	1.7lbs (0.77kg)

Top Rail

* Rails are ground and machined on all surfaces.

Product Number	A	B	Unit Weight
KEY-30	29 7/8in (75.88cm)	4.0in (10.1cm)	48lbs (21.7kg)
KEY-40	39 7/8in (101.28cm)	4.0in (10.1cm)	64lbs (29kg)

Spacer Mount Rail

PRODUCTS

Product Number	A	B	Unit Weight
SPACER-30	29 7/8in (75.88cm)	3.0in (7.62cm)	24lbs (10.8kg)
SPACER-40	39 7/8in (101.28cm)	3.0 (7.62cm)	32lbs (14.5kg)

Bottom Rail

PRODUCTS

Product Number	A	B	Unit Weight
BRAIL-30	29 7/8in (75.88cm)	3.0in (7.62cm)	54lbs (24.5kg)
BRAIL-40	39 7/8in (101.28cm)	3.0in (7.62cm)	74lbs (33.5kg)